|
![]() |
|
|
| Synth | Effect | Mixer | Tool | Midi | Sampler | ... | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |
|
|
| > 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 | Next >> |
|
|
|
|
|||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Created: 14.12.09, 15:13 Last change: |
![]() |
|
Downloads 6 |
||||||||||||||||
| Created: 14.12.09, 16:29 Last change: |
![]() |
|
Downloads 7 |
||||||||||||||||
| Created: 14.09.02, 16:23 Last change: |
![]() Download (Y.M. Server) |
Who knows? Could be useful ... |
|
Celmo Downloads 427 |
www.celmo.com |
||||||||||||||
| Created: 10.06.03, 18:07 Last change: |
![]() Download (Y.M. Server) |
Phasefix and Phasefix-X are about the same, the -X version has a bypass for the sample delay. Fiddling around with them, you'll find a 0-200 samples delay for each channel of the stereo path. The sample delay can be used to set a delay on designated channel, thus making up for phase off-set. Can also be used for phaser-like effect The bypass on the -x version bypasses the delay. Mono mode sums both inputs to check for mono compatibility. A Left and a Right button, they invert the L or R channel and mono the signal at the same time. Perfect phase signals should mute each other. If they do, you know the incoming signal is in perfect phase. If they don't mute, adjust Delays until it's as quiet as possible. Cheers, Red_MuZe |
|
ReD_MuZe Downloads 428 |
users.pandora.be/at0m/ |
||||||||||||||
| Created: 19.12.01, 04:07 Last change: |
Download (Y.M. Server) |
have fun DeFex |
|
defex Downloads 1014 |
www.neutron7.com |
||||||||||||||
| Created: 15.11.11, 16:51 Last change: |
![]() Download (other Server) |
|
huicholity Downloads 18 |
||||||||||||||||
| Created: 15.11.11, 16:51 Last change: |
![]() |
|
EarlyFirst Downloads |
||||||||||||||||
| Created: 15.11.11, 16:51 Last change: |
![]() Download (other Server) |
|
Paul Tanti Downloads 70 |
||||||||||||||||
| Created: 03.11.00, 11:10 Last change: |
![]() Download (other Server) |
|
onomat Downloads 457 |
www.deviceplug-ins.com |
|||||||||||||||
| Created: 15.11.11, 16:51 Last change: |
![]() |
* the max pos and max neg knobs set the volume ranges of all the knobs in the matrix. * max pos and max neg knobs set to full the points in the * matrix can invert the phase of your signal. * this .mdl was designed as a utillity so the knobs still make zipper sounds. *to quickly zero the matrix cycle the max pos and max neg to zero and back. *i hope the module is at least useable! |
|
j9k Downloads |
| > 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 | Next >> |